| PART |
Description |
Maker |
| VS-40L15CTPBF |
Guard ring for enhanced ruggedness and long term reliability
|
Vishay Siliconix
|
| 200CMQ035 200CMQ045 200CMQ-SERIES 200CMQ040 |
SCHOTTKY RECTIFIER
Guard ring for enhanced ruggedness and long term reliability
Center tap module
|
Sangdest Microelectroni...
|
| 224CMQ 224CMQ035 224CMQ045 |
Guard ring for enhanced ruggedness and long term reliability
SCHOTTKY RECTIFIER
|
Sangdest Microelectroni...
|
| BAT64 BAT64-04 BAT64-05 BAT64-06 Q62702-A961 Q6270 |
Silicon Schottky Diodes (For low-loss/ fast-recovery/ meter protection/ bias isolation and clamping applications Integrated diffused guard ring)
Recognised Certification- 5W DIP Package- 4kVDC & 6kVDC Isolation- Regulated Output- Continuous Short Circiut Protection Auto-Restarting
Silicon Schottky Diodes (For low-loss, fast-recovery, meter protection, bias isolation and clamping applications Integrated diffused guard ring)
Silicon Schottky Diodes (For low-loss fast-recovery meter protection bias isolation and clamping applications Integrated diffused guard ring)
From old datasheet system
|
SIEMENS AG
SIEMENS[Siemens Semiconductor Group]
|
| SB20100 |
Guard Ring Die Construction for Transient Protection
|
Sangdest Microelectroni...
|
| 64001-1400 64001-1500 19073-0188 19073-0170 19204- |
Nylon Insulated Ring 3 and 4 Way Ring Splice and # 5-6, # 8, # 10, 1/4 Stud Size Ring Terminal with Universal Crimp Tool
|
MolexKits
|
| 19203-0034 19203-0099 19203-0042 19203-0035 19203- |
NICKEL/RING/HI-TEMP KRIMPTITE (AA-U-133- 1 mm2, NICKEL, RING TERMINAL
RING/HI-TEMP VERSAKRIMP (C-T-328-10) 6 mm2, COPPER ALLOY, NICKEL FINISH, RING TERMINAL
Ring Tongue Solderless Terminal; Wire Size (AWG):16-14; Stud Size:#5, #6 2 mm2, STEEL, NICKEL FINISH, RING TERMINAL
NICKLE/RING/HI-TEMP KRIMPTITE (AA-U-133- 1 mm2, NICKEL, RING TERMINAL
6 mm2, STEEL, NICKEL FINISH, RING TERMINAL
|
Molex, Inc.
MOLEX INC
|
| A43E06161V-75 A43E06161V-75UF A43E06161V-75F A43E0 |
Switch Guard; For Use With:2 Position Toggle Switches; Features:Flush Mount; Leaded Process Compatible:No; Peak Reflow Compatible (260 C):No; Accessory Type:Switch Guard RoHS Compliant: No
Switch Guard; For Use With:2 Position Toggle Switches; Features:MIL-G-7703 Approved, MS25224-1; Leaded Process Compatible:No; Peak Reflow Compatible (260 C):No; Accessory Type:Switch Guard RoHS Compliant: No 12k × 16位2银行同步DRAM
512K X 16 Bit X 2 Banks Synchronous DRAM 12k × 16位2银行同步DRAM
|
AMIC Technology Corporation
AMIC Technology, Corp.
|
| 1N4007G 1N4004G 1N4001G 1N4002G 1N4002 1N4006 1N40 |
Rectifiers(整流 1 A, 1000 V, SILICON, SIGNAL DIODE
(1N4001G - 1N4007G) Rectifiers(Rugged glass package / using a high temperature alloyed construction)
IC REG VOLT 4.8V 240MA SOT-23
Rectifiers(Rugged glass package/ using a high temperature alloyed construction)
Rectifiers(Rugged glass package, using a high temperature alloyed construction) 1 A, 50 V, SILICON, SIGNAL DIODE
Rectifiers(Rugged glass package, using a high temperature alloyed construction) 整流器（坚固的玻璃封装，采用高温合金建设
Rectifiers(Rugged glass package, using a high temperature alloyed construction) 1 A, 400 V, SILICON, SIGNAL DIODE
|
PHILIPS[Philips Semiconductors]
http://
NXP Semiconductors N.V.
|
| TDA3653 TDA3653C TDA3653B |
Vertical deflection and guard circuit10垂直偏转与防护电路（90度）)
VERTICAL DEFLECTION AND GUARD CIRCUIT 90∑
VERTICAL DEFLECTION AND GUARD CIRCUIT 90°
|
PHILIPS[Philips Semiconductors]
NXP Semiconductors
|
